Ways to Lay Block Paving

DIY projects can be extremely gratifying– as well as more affordable! If you’re block paving your outdoor patio or driveway, there’s no need to get somebody else in; as long as you have actually got the time and inspiration to do it on your own it’s in fact rather simple and simple to find out. Simply ensure you have the appropriate tools and you’re good to go!

How Will Your Paving Look?

The primary step is to decide just how you want your block paving to look. If you’re changing old paving, just what didn’t you like about it? What improvements could you make? You ought to take in the general shape, functional elements (such as size) and pattern of the bricks. It’s likewise a great idea to think about exactly what colour bricks will well go with your house– you do not desire anything to clash.


Next, you’re going to intend to prepare the location. Mark out a location and dig it out, making sure to dig far enough down to make sure that your paving will be despite the surrounding surface area. For this, you should use plant devices such as a miniature excavator or a JCB.

Produce The Sub-base

Produce a sub-base to form the structures of your block paving. Your sub-base ought to be at the very least 100mm thick, and it can be a good idea to put it above a layer of weed-fabric, to stop weeds from growing with your sidewalk. Finish your sub-base by going over it with a shaking place. This will squash it down and level it.

Put Down Edge Restraints Place edge restrictions down to define the edge of your paving. They ought to be firm and also supportive as the external location is the weakest part of the paving. They will additionally function as a quick guide for the shape of your block paving.

Begin Screeding

Next off, you’ll need to screed the location, including in the structures and making a level surface for the paving to rest on. Place about 50mm of slightly moist sharp sand down and make use of a shaking plate once again to smooth and establish. After that take down a second layer, just the same as the first.

Put Down The Block Paving

Ultimately, you can begin putting down your bricks. For the best finish, start at the bottom of a slope and go up. The joints of the bricks ought to overlap– just like in a wall surface– so you’ll be entrusted gaps that you’ll have to fill out with cuts of brick. Once your block paving is down and all the brick are properly positioned, sweep some kiln dried sand over the surface area. This will load the spaces between the joints.

See, not too difficult! Block paving is actually pretty simple, and could provide you exceptional outcomes if done right. When you have actually completed, take your time to sit back and also admire all your effort- you deserve it!