A Guide to Laying Block Paving

Whether you’re landscaping your garden or re-doing the driveway, it can be extremely beneficial to know the best ways to lay block paving. By taking the DIY approach, you could create exactly what you want and save yourself a reasonable quantity of cash– something your bank balance will probably thank you for. All you need to do is obtain the right tools and read this overview.

Create A Block Paving Style

The primary step is to choose exactly how you desire your block paving to look. If you’re changing old paving, what really did not you like concerning it? What renovations could you make? You should think of the overall form, sensible elements (such as dimension) and pattern of the bricks. It’s likewise a great idea to consider just what colour bricks will well go with your home– you do not desire anything to clash.


Next off, you’re going to want to prepare the site. Mark out a location and dig it out, making sure to dig far enough down to ensure that your paving will be despite having the surrounding surface. For this, you should utilise plant devices such as a mini excavator or a JCB.

Produce The Sub-base

Produce a sub-base to create the foundations of your block paving. Your sub-base ought to go to the very least 100mm thick, and it can be a good idea to place it above a layer of weed-fabric, to prevent weeds from growing with your sidewalk. Finish your sub-base by going over it with a shaking place. This will certainly squash it down and level it.

Put Down Edge Restraints

Place edge restraints to define the side of your paving. They ought to be firm and also supportive as the outer location is the weakest part of the paving. They will certainly additionally work as an overview for the shape of your block paving.

Begin Screeding

Next off, you’ll have to screed the location, adding to the foundations and making a level surface area for the paving to rest on. Place about 50mm of slightly wet sharp sand down and use a shaking plate again to smooth and set. Then take down a second layer, just the same as the very first.

Put Down The Block Paving

Finally, you can begin setting down your bricks. For the very best coating, begin at the end of an incline and go up. The joints of the bricks must overlap– similar to in a wall– so you’ll be entrusted voids that you’ll have to fill out with cuts of brick. As soon as your block paving is down and all the brick are correctly placed, sweep some kiln dried out sand over the surface. This will certainly load the voids in between the joints.

See, not also complicated! Block paving is actually very very easy, and can provide you outstanding outcomes if done right. When you have actually completed, take your time to sit back as well as appreciate all your hard work- you deserve it!